Shop
Showing 889–912 of 1320 results
-
FLUKE
Fluke 64 MAX Multifunction IR Thermometer
- Flashlight and large, easy-to-read backlit LCD display for easy viewing even in dark environment.
- IP54 rated for extra protection against airborne contaminants.
- 99 data point logging.
- 30 hour battery life so your tool can perform as long as you need it to.
- Displays the minimum, maximum or average temperature, or the difference between two measurements.
- High and Low alarms for rapid display of measurements outside set limits.
- Small and lightweight design fits easily into your tool box.
- Powered by one (1) AA alkaline battery.
- Flashlight : Yes.
- Operating Altitude : 2,000 meters above mean sea level.
- Optical Resolution : 12,000 meters above mean sea level.
- Drop test 3 meters.
- Type of Product : Digital Infrared Thermometer
- Temperature Range(C) : -30°C to 600°C
- Distance To Spot Ratio : 20:1
- Accuracy : ±1.0°C
- Repeatability : ±0.5°C
SKU: n/a -
FLUKE
Fluke 414D Laser Distance Meter
- Instantly measures up to 50m (165 feet) with one button
- Laser accuracy of +/- 2mm (0.08 in)
- Easy, automatic math for area and volume, add and subtract with ease
- The most advanced laser technology for distance measurement
- Simple one-button operation to instantly measure distance between two objects
- Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in)
- Bright laser for easy targeting even at longer distances
- Quick calculation of area (square feet/meters) and volume
- Easy addition and subtraction function
- Pythagoras function indirectly measures height via two other measurements
- Stores up to five measurement results
- Battery life of 3000 measurements with automatic shut-off feature
- Two-line display with display hold (until next button is pressed)
- Carrying pouch secures to your tool belt
- Powered by two AAA batteries
SKU: n/a -
FLUKE
Fluke 419D Laser Distance Mete
- Instantly measures up to 80m (260 ft) with accuracy of +/- 1mm
- 3-line display plus storage for 20 complete displays
- Tripod mountable
- Measure up to 80 m (260 ft)
- Higher accuracy: +/-1 mm (0.04 in)
- View more data with backlit, three-line display
- Full Pythagoras function for height measurements
- Storage of 20 complete displays for quick recall
- Audible keypad feedback
- Minimum/Maximum function
- Tripod mode for mounting meter on a tripod when measuring long distances
- Stake Out feature helps you mark out defined lengths such as when constructing wooden frames
- Automated End-piece Correction for measuring from an edge or corner –a built-in sensor detects the position of this bracket and automatically changes the reference point.
- Enhanced environmental protection:IP54-rated as dust and water spray resistant
- Improved battery life of 5000 measurements with auto laser off and auto power off feature
SKU: n/a -
FLUKE
Fluke 59 MAX+ Infrared Thermometer
- Easy to handle infrared thermometer with precise laser targeting and 10:1 distance to spot ratio
- Measures temperatures from -30°C to 500°C (-22°F to 932°F)
- Provides IP40 rating for extra protection
- Presents a large, backlit LCD display for easy viewing
- Features a small, lightweight design that fits easily fits into your tool bag
- Displays the minimum, maximum or average temperature, or the difference between two measurements
- High and Low alarms for rapid display of measurements outside the limits
Powered by one (1) AA battery
SKU: n/a -
-
FLUKE
Fluke 59 Mini Infrared Thermometer
- Temperature range -18 °C to 275 °C (0 °F to 525 °F)
- Response time (95%) <500mSec
- Spectral response 6.5 to 18 microns
- Emissivity Preset to E=0.95
- Optical resolution (D:S) 8:1 (calculated at 90 % energy)
- Repeatability ±1 % of reading or ±1 °C (±2 °F) whichever is greater
- Ambient operating range 0 °C to 50 °C (32 °F to 120 °F)
- Relative humidity 10-90 % RH non-condensing, @ 30 °C (86 °F)
- Storage temperature 20 °C to 65 °C without battery (-4 °F to 150 °F without battery)
- Weight/dimensions (with battery) 200 g 152 x 102 x 38 mm (7oz. 6 x 4 x 1.5 in)
- Power 9V battery
- Battery life 4 Hours
- Display resolution 0.2 °C (0.5 °F)
- Display hold 7 Seconds
- Standards EN 61326-1 Electromagnetic Emissions and Susceptibility , EN61010-1 General Safety, EN 60825-1 Laser Safety
- Laser FDA and IEC Class II
- Certifications CE
SKU: n/a -
FLUKE
Fluke 62 MAX Infrared Thermometer
- Rugged: 3-meter (9.8-foot) drop tested.
- Dust and water-resistant: IP54 rated for dust and water resistance.
- Ergonomically designed: Completely redesigned for a more natural hand fit.
- Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box.
- Distance to spot: Precise laser technology makes for more accurate and repeatable measurements.
- Temperature Range: -30 °C to 500 °C (-22 °F to 932 °F)
- Accuracy: ±1.5 °C or ±1.5% of reading,
- 10 °C to 0 °C: ±2.0
- 30 °C to -10 °C: ±3.0
- Response Time (95%): <500 ms (95% of reading)
- Spectral Response 8 to 14 microns
- Emissivity 0.10 to 1.00
- Optical Resolution: 10:1 (calculated at 90% energy)
- Display Resolution: 0.1 °C (0.2 °F)
- Repeatability of Readings: ±0.8% of reading or <±1.0 °C (2 °F), whichever is greater
- Power: AA battery
- Battery Life: 10 hours with laser and backlight on
- Weight 255 g (8.99 oz)
- Size (175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches
- Operating Temperature 0 °C to 50 °C (32 °F to 122 °F)
- Operating Altitude 2000 meters above mean sea level
- Storage Altitude 12,000 meters above mean sea level
- IP Rating IP 54 per IEC 60529
- Drop Test 3 meters
- EMC EN 61326-1:2006 EN 61326-2:2006
- Compliance EN/IEC 61010-1: 2001
- Laser Safety FDA and EN 60825-1 Class II
SKU: n/a -
FLUKE
Fluke RLD2 Leak Detector Flash Light
- The compact, easy-to-use, RLD2 UV flashlight uncovers refrigerant leaks instantly.
- Use the UV light to find the leakage area, then, use the laser pointer to pinpoint the exact leak location.
- With 100,000 hours of life, and four operating modes, this versatile leak detector is a must have for HVAC Technicians.
- Six UV LEDs (395 nm wavelength) detect leak detection dyes
- Laser pointer clearly locates center of the UV field for accuracy
- Three LED flashlight with 100,000 hour LED life
- Operating temperature 0 ° C to 50 ° C
- Four operating modes: flashlight, UV light, laser light, UV/laser light combination
- Convenient detachable key chain carabiner and AAA battery included
SKU: n/a -
FLUKE
Fluke T+PRO-1AC Electrical Tester and AC Voltage Detector Kit
- Maximum measurable voltage: 600V AC/DC
- Resistance: 9.99 kilohms
- AC bandwidth: 45Hz to 65Hz
- Maximum working voltage: 1,000V
- Power: (3) AAA batteries
- Installation rating: CAT IV, 600V; CAT III, 1,000V
- Standards met EN safety standard 61010-1, Canadian Standards Association,
- Weight: 9.9 oz.
- Dimensions: 1.3 x 2.15 x 7.6 inches (H x W x D)
SKU: n/a -
FLUKE
Fluke LVD2 Volt Light
- Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design.
- The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications.
- The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54 cm to 12.7 cm) from the source and red when at the source.
- Dual Sensitivity
- LED light with 100,000 hour life
- Detects from 90 to 600 V AC
- Rated to CAT IV 600 V
- Dual Levels of Detection
- Blue indicates proximity to AC Voltage source
- Red indicates you’re at the source
- Operating temperature 0 deg C to 50 deg C
- Ultra-Bright White LED
- 100,000 hr bulb
- AAA battery included
SKU: n/a -
FLUKE
Fluke T+PRO Electrical Tester
- Three ways to detect AC/DC voltage: light, sound, and vibration
- Added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight
- The T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KOhms, as well as a backlit LCD display for easier viewing
- Display resolution of 0.1 V, ideal for troubleshooting low-voltage lighting
- Resistance (Ohms) to 9.99 kOhms
- Rotary Field Indication
- Display Hold for easier viewing in hard-to-test areas
- Detect live voltage even when the batteries are dead
- Extra heavy-duty, replaceable test leads for more flexibility and durability
- CAT IV 600 V, CAT III 1000 V rated for added user protection
- Continuity beeper
- Bright LED flashlight for work in poorly lit areas
- GFCI Trip
- On/Off switchable beeper, selectable according to your environment
- Compliant with latest NFPA 70E recommendations*
- Replaceable test probes for added flexibility and convenience
- Convenient probe storage on the back
- Probe holder for easier testing
- Hazardous voltage warning light for added user protection
- Test lead strap included for better test lead management
- AC/DC Voltage: 12 V – 600 V on LED bar, 10.2 V – 600 V on LCD
- Auto-off saves battery power
SKU: n/a -
FLUKE
Fluke 9062 Phase sequence Indicator
- The unique Fluke 9062 provides rotary field and motor rotation indication with the benefits of contact-less detection.
- Purpose made for commercial and industrial environments, the Fluke 9062 provides rapid indication of 3 phase rotation using test leads supplied or can be used to determine motor rotation on synchronous and asynchronous 3 phase motors.
- The contact-less detection is ideal for use on motors where the shaft is not visible.
- The included test probes have a variable clamping range for safe contact, also in industrial sockets.
- Voltage range Up to 400 V
- Phase Display 120-400 V AC
- Frequency range 2-400 Hz
- Operating timer Continuous
SKU: n/a -
FLUKE
Fluke 101+ Digital Multimeter with kit
- Small light weight design – easy to carry in pocket
- Rugged, reliable accurate readings
- Long battery life with auto power Off
- Fluke India calibration certificate
- DC Voltage: 600 volts
- AC Voltage: 600 volts
- DC Accuracy: ± 0.5% + 3 digit
- AC Accuracy: ± 1% + 3 digit
- Resistance: 40 M ohm; Resistance Accuracy: ± 1.5% + 3 digit
- Capacitance: 100 μF
- CAT III 600 volts safety rated
- AC/DC voltage, resistance, capacitance, frequency measurement
- Capacitance: 100 μF
- CAT III 600 volts safety rated
- Weight: 481 g
SKU: n/a -
FLUKE
Fluke 107 Palm-sized Digital Multimeter
- Voltage, resistance, continuity, capacitance
- Input terminal for ac and dc current measurements to 10 A and current
- Backlit display
- Data hold
- Diode test, plus frequency and duty cycle measurements
- AC volts: 6.000 V, 60.00 V, 600.0 V
- DC volts: 6.000 V, 60.00 V, 600.0 V
- AC millivolts 600.0 mV
- Resistance (Ohms) 400.0 O
- Capacitance
- Frequency Hz: (10 Hz – 100 kHz) 50.00 Hz
- Duty cycle 1% to 99%
- AC current: (40 Hz to 200 Hz) 4.000 A, 10.00 A
- DC Current 4.000 A, 10.00 A
- Display (LCD) 6000 counts, updates 3/sec
- Battery Type 2 AAA, NEDA 24A, IEC LR03
- Battery Life 200 hours minimum
SKU: n/a -
-
FLUKE
Fluke TPAK ToolPak Magnetic Meter Hanger
- The Fluke TPAK ToolPak Magnetic Meter Hanger allows you to hang your meter on nails, hooks and many other objects so you can take your measurements hands-free.
- The kit includes powerful magnetic hanger, 9 inch hook and loop strap, a hook hanger and a general purpose hanger.
- Solves any hanging and positioning problem you may face. Attaches to most Fluke meters.
SKU: n/a -
-
Others
7 in 1 BGA Repair Station Maintain Platform BGA Repairing Tools for Cell Phone
- Original Magnetism auto-locking, double-work table design.
Widely used in PC, cellphone and other electronic devices repairing. - 7-in-1 Tools:
1. Maintain Platform
2. Magnetic Frame
3. Wire
4. Clamp
5. Selected Tool
6. Soldering Paste
7. Solder Wire
SKU: n/a - Original Magnetism auto-locking, double-work table design.