No products in the cart.
UNI-T
Showing 1–24 of 46 results
-
-
DC POWER SUPPLY, UNI-T
UNI-T UTP3315TFL DC Power Supply 30V 5A
- Single channel, 3-bit digital display, shows voltage and current simultaneously
- Voltage display resolution: 100mV; current display resolution: 10mA
- Voltage output: 0~30V consecutive and adjustable voltage
- Current output: 0~5A
- Auto voltage and current stabilization conversion, current limiting protection, undamaged for any external usage
SKU: n/a -
UNI-T
UNI-T UT139C True Rms Digital Multimeter
- Display Count: 6000
- Auto Range: Yes
- TRUE RMS: Yes
- Bandwidth: 45Hz ~ 1kHz
- Variable Frequency Device (VFD): Yes
- Duty Cycle: 0.1% – 99.9%
- Diode: around 3V
- NCV: ≥ 100V rms
- Auto Power Off: Around 15 Minutes
- Continuity Buzzer: Yes
- LCD Backlight: Yes
- CAT-III (to 600V) safety rating
SKU: n/a -
UNI-T
UNI-T UT501A Insulation Resistance Tester
- UNI-T’s UT501A is a 2000-count auto range digital insulation resistance tester with low resistance test, high voltage and low battery indication.
- Test Voltage: 100V/250V/500V/1000V
- Display Count: 1999, LCD Backlight
- Auto Range
- Low Battery Indication
- Alarm Indication and Buzzer
- High Voltage Indication
- Overload Indication
- Auto Discharge
- Test Voltage Vice Display
SKU: n/a -
UNI-T
UNI-T UT511 Insulation Resistance Tester – 1KV/ 10GOhm
- Test Voltage: 100V/250V/500V/1000V
- 10 Gohm
- Large 9999 display with 30-segment analog bar graph
- PI/DAR measurements
- Comparison, upper and lower limit functions
- Continuous measurement mode
- Auto power off
- 18-group data storage
- Backlight
- Auto current discharge and high-voltage output alarm
- Timer measurement mode, auto measure within 15 minutes
- Low battery and over range indications
SKU: n/a -
UNI-T
UNI-T UT 502 Insulation Tester
- 2000 count LCD display, overload indication, backlight
- AC voltage measurement, auto power off
- Auto discharge
- Continuous measurements mode, red warning light and buzzer function
- Continuous low resistance measurement
- PI and DAR measurement, auto resistivity calculation
- Low resistance returning to zero function to improve accuracy
SKU: n/a -
UNI-T
UNI-T UT611 LCR Meter
- UT611 LCR meters are more advanced meters used to measure inductance, capacitance and resistance.
- Advanced features include series/parallel measurement modes, quality factor/loss/phase angle measurements, equivalent/DC resistance measurements and 5 kinds of measurement frequency in AC mode for selection.
SKU: n/a -
DC POWER SUPPLY, UNI-T
UNI-T UTP1306S DC Power Supply- 32V, 6A
- The UTP1306S power supply is an economical switching DC power supply with a single output.
- 32V/6A
- Voltage/current display resolution: 10mV/1mA
- Four-digit voltage and current display
- Over voltage/overcurrent/overtemperature protection
- Three groups of one-button call memory values
- Can be set Flow/overvoltage protection value
- Independent output switch
- Operation button can be locked
SKU: n/a -
UNI-T
UNI-T UT352 Sound level meter With Data Logging
- This new digital sound level meter with a high accuracy of +/- 1.5dB and a large, backlit and well-organised digital LCD display with bar graph is perfectly suited for use in all relevant areas.
- In addition the device has a data logger that makes it possible to store up to 64 measurement records.
- Data logger
- Min. and max. measurements
- Over-range and under-range indicator
- Analogue AC/DC outputs for connection to frequency analysers or X-Y shaft recorders
SKU: n/a -
UNI-T
UNI-T UT 70B Digital Multimeter
- Test DC AC Voltage,DC AC Current,Resistance,Capacitance, Temperature(Celsius/Fahrenheit), and Diode
- Check Frequence,Continuity Buzzer,Full Symbol Display,Sleep Function
- 4000 Count LCD,Low Voltage Display, Data Hold, LCD Backlight, RS232 Interface
- Auto Range
- Fused 10 A range
- Data Hold function
- Max/Min mode
- Relative mode
- Analogue bar graph
- Sleep mode
- Low battery indication
SKU: n/a -
-
UNI-T
UNI-T UT 71B Intelligent Digital Multimeter
- UNI-T’s UT71B is a True RMS digital multimeter with 100kHz bandwidth, high measuring accuracy and high-capacity data storage function.
- Bandwidth: 100kHz
- Voltage ranges DC: 200mV / 2V / 20V / 200V / 1000V ± (0.05%+5)
- Voltage ranges AC: 2V / 20V / 200V / 1000V ± (0.6%+40)
- Current ranges DC: 200µA / 2mA / 20mA / 200mA / 10A ± (0.15%+20)
- Current ranges AC: 200µA / 2mA / 20mA / 200mA / 10A ± (0.8%+15)
- Resistance ranges: 200 Ohm / 2 kOhm / 20 kOhm / 200 kOhm / 2 mOhm / 20 mOhm ± (0.4%+20)
- Capacity ranges: 20nF / 200nF / 2µF / 20µF / 200µF / 2mF / 20mF ± (1.2% +20)
- Temperature measurement: -40°C ~ 1000°C ±(1%+30)
- Frequency ranges: 20Hz / 200Hz / 2kHz / 20kHz / 200kHz / 2MHz / 20MHz / 200MHz ±(0.1%+15)
- Data logger: 100
- Display: 20,000 counts
SKU: n/a -
UNI-T
UNI-T UT204 True RMS Clamp Meter
- DC Current: 40A / 400A
- AC Current: 40A / 400A
- Auto Ranging
- True TMS (AC Only)
- UT204 is an Auto/Manual range True RMS AC/DC clamp meter, it can be used to measure AC/DC voltage and current.
- Also you can use it to measure resistance, frequency, continuity test, diode check & duty cycle.
- For your convenience, it comes with a plastic carrying pouch.
SKU: n/a -
UNI-T
UNI-T UT502A Insulation Tester
- UT500 series insulation testers are used to measure the insulation resistance of electrical equipment and household appliances.
- This is done by measuring the insulation resistance between electrical circuits or between circuits and ground.
- UT500 series can measure insulation resistance, AC voltage, low resistance, PI (Polarization Index) and DAR (Dielectric Absorption Ratio).
- UT502A meet IEC61557 standard.
- Test Voltage: 500V/1000V/2500V
- 2000 count LCD display, overload indication, backlight
- AC voltage measurement, auto power off
- Auto discharge
- Continuous measurements mode, red warning light and buzzer function
- Continuous low resistance measurement
- PI and DAR measurement, auto resistivity calculation
- Low resistance returning to zero function to improve accuracy
SKU: n/a -
UNI-T
UNI-T UT302D Infrared Thermometer
- UT302 series measures object temperature from a distance through its emitted radiation.
- They feature 20:1 D:S ratio, adjustable emissivity and can be powered by USB or battery.
- MAX/MIN/AVG/DIF display
- Tripod hole and lock measurement function for continuous measurement (SCAN mode)
- ℃/℉ options
- Optional (on/off) laser pointer
- LCD backlight
- Auto power off, data hold
- Adjustable emissivity
- USB interface
SKU: n/a -
UNI-T
UNI-T UT382 Digital Lux Meter Light Meter
- Illuminace Measurement: 20 Lux, 200 Lux, 2000 Lux, 20000 Lux
- Accuracy : 3%
- Illuminace Measurement: 2 FC, 20 FC,, 200 FC, 2000 FC
- Display Count: 1999
- Auto Range
- Data Hold
- Auto Power Off: Around 10 Minutes
- Low Battery Indication: Around ≤7.1V
- MAX/ MIN Mode:
- Data Logging: 2044
SKU: n/a -
-
UNI-T
UNI-T UT202A Clamp Meter
- Display Count: 2000
- Compact size AC clamp meter, up to 600 amps
- Jaw Capacity: 28mm
- Input Impedance for DC V: Around 10Mω
- AC/DC voltage, resistance, continuity & diode check
- Manual Range + Data hold + Maximum/Minimum value measurement
- Continuity Buzzer.
- Measurement update speed 3 times/second, compact and comfortable design.
- Compliance with safety requirements IEC 61010, CAT III 600 V / CAT III 300 V.
- Can be used for AC/DC voltage test, AC current test, electric current resistance, diode test, etc.(PS: CANNOT test DC current).
- UT 202A is a stable, secure, and reliable 3 1/2 digit clamp meter.
- Whole circuit design to LSI double integral A / D converter as the core, the whole range of overload protection circuit, unique design makes it the superior performance of a dedicated electrical instruments.
- It can be used to measure the DC voltage, AC current, resistance, diodes, circuit continuity and so on.
SKU: n/a
